Usage of power plant specific insulation hook nails

The power plant specific insulation hook nail is a special hook nail used to fix the insulation layer. The following is the usage method of the power plant specific insulation hook nail:

Preparation work: Before installing the insulation hook nails, it is necessary to prepare the required insulation materials, tools, and related accessories in advance.
Positioning point: According to the design requirements and construction drawings, the positioning point of the insulation hook nail is determined at the location where the insulation layer needs to be fixed. Generally, holes are reserved on steel or concrete structures.
Cleaning holes: Use tools such as hammers, drills, etc. to clean the positioning points, ensuring that the debris and dust inside the holes are completely removed for subsequent construction.

Installation of insulation hook nails: Insert the insulation hook nails into the cleaned holes, ensuring that the length of the hook nails is appropriate, so that their bottom can tightly fit the building structure. After insertion, gently tap the hook nail with a hammer to ensure its secure installation.
Fixed insulation layer: Lay insulation material at an appropriate position above the insulation hook nails to ensure coverage of the insulation hook nails. Subsequently, use specific fasteners such as clips or clamps to secure the insulation layer to the insulation hook nails, ensuring that the insulation layer does not loosen.
Inspection and adjustment: After installation, it is necessary to inspect the insulation hooks, nails, and fixed insulation layers to ensure that the installation quality meets the requirements. If necessary, adjustments and corrections can be made. During the installation process of specialized insulation hooks and nails for power plants, relevant safety operating procedures should be followed and reasonable operations should be carried out according to the actual situation.